- ³ /hr (1,000 LPH)
Filtration fineness -
Maximum temperature- Maximum working pressure- Minimum working pressure- Connection size - ¾ inch
Dimensions (mm) 115x75x45
Approximate Weight 0.7 kg
The Serus water filter has two modes of operation: filtration and flushing.In the filtration mode, water penetrates the filter element inside and leaves the filter cleaned. All mechanical impurities remain outside the filter element at the bottom of the flask .The rinse mode is switched on / off by opening drainage valve at the bottom of the flask During washing, the water stream removes all accumulated debris from both the surface of the filter element and the bottom of the filter housing.The operation of the drain valve can be done manually or with a automatic flushing device.
1.The body and the filter flask are made of stamped brass with nickel plated coating
2.A water structurer inside the filter cartridge made of fine multi-polarmagnet, amber and rhinestone for structured water
3.A fine string filtering element made of high-alloyed stainless steel - NBR seals.
Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is done without dismantling. The filter position is only in the vertical position with the drain valve pointing down. Installation in a confined space is possible.
Serus water filter FS-3 is used for domestic and commercial purposes for the continuous supply of filtered cold and hot water at normal pressure in the pipeline. Prevents the penetration of foreign matter: rust particles, hemp fibers, grains of sand, etc.